Search the full range of products and services available here at Glaston with our handy search bar.
If you can’t find what you’re looking for then please get in touch on +44 (0)1695 51010 or email email@example.com and one of our advisers will be happy to discuss your requirements and offer a solution.
For 10 years our new customer had used two Ingersoll Rand 350 bar piston air compressors to maintain the 350 bar and 40 bar operating pressures. Unfortunately, both units failed within a short space of time and hire equipment was brought in at a considerable expense.
Subsequently, Glaston were invited to review the high pressure system following a successful project to overhaul the general purpose 7 bar air. This review resulted in the installation of four 160kW HPC energy efficient air compressors. 350 bar and 40 Bar Compressor installation
As opposed to offering two new 350 bar compressors, it was deemed more cost effective, from both a purchasing and operating perspective, to supply a 350 bar compressor to fulfill the 350 bar requirement. And a 40 bar unit was supplied to fulfil the 40 bar air requirement. 350 bar and 40 Bar
Once the site understood the benefit to generating compressed air at the pressures actually required, Glaston put forward a 350 bar SAUER piston compressor and a 40 bar SAUER piston compressor. SAUER are renowned worldwide for the superior build and reliability of high pressure air compressors. Additionally, SAUER air compressors are used extensively through out the world serving general industry, shipping and many navies. 350 bar and 40 Bar Compressor installation
Following a rigorous tendering process, two SAUER units were installed in the summer of 2010 and have been successfully operating since.
If you would like to find out more about our air compressor installation services then please speak to our team of expert engineers at Glaston.